65
BIOS Setup
as shown in the following figure:
Note:
it is suggested to shut down the system first and then startup, after the flash is
completed.
4.
If ME is changed, it needs to update BIOS version and ME. And it needs to start
IPMI service, execute the command: service ipmi start.
Meflash script integrates the IPMI command that can disconnect BMC and ME
communication, so it needs to start IPMI service first, to make sure that the ME
flash process will not be affected by BMC and ME communication.
5.
To update BIOS version and ME, execute the command: ./Meflash.sh BIOS.bin.
The flash process is shown as follows:
