66
Note:
after the flash is completed, please power off the system, make sure there is
no residual electricity on the motherboard, and then power it on and start the system.
Users can judge whether there is residual electricity on the motherboard through the
status of motherboard UID light. Press UID light button, if UID light is illuminated,
there is residual electricity on the motherboard; otherwise, there is no residual
electricity on the motherboard.
In addition, it needs to run lnxflash tool under root, and lnxflash tool needs the
support of driver, the system needs to be installed with gcc package and Kernel
source, otherwise, the driver can be generated.
Another method is generating the driver file (amifldrv_mod.o) under the system that
has the same kernel. And then copy it into the lnxflash toolkit. Each time Kernel
updates, the driver should be generated again. Specific operations are as follows:
#./afulnx_64 /MAKEDRV
Or
#./afulnx_64 /MAKEDRV KERNEL=/lib/modules/$(uname -r)/build
Through the following command, users can check whether the current Kernel version
and the one in amifldrv_mod.o file are consistent or not.
#uname –r
# modinfo amifdrv_mod.o
