64
Sharelink Network
Enable or disable sharelink network
Enabled
Shared MAC Address
MAC address of share link port display
--
Shared Ipv4 Source
Ipv4 address source of share link port setting
--
Shared Ipv4 IP Address
Ipv4 IP address of share link port setting
--
Shared Ipv4 Subnet Mask
Ipv4 subnet mask of share link port setting
--
Shared Ipv4 Gateway Address
Ipv4 gateway address of share link port setting
--
(a)
BMC dynamic IP setting method:
(1)
Select Dedicated or Shard BMC port;
(2)
Modify the IP address acquisition mode of this port to DHCP through IPV4 source.
(3)
Select Exit -> Save Change Without Exit option to save, it takes effect immediately;
(b)
BMC static IP setting method:
(1)
Select Dedicated or Shard BMC port;
(2)
Modify the IP address acquisition mode of this port to Static through IPV4 source.
(3)
Select IPV4 IP Address, press Enter, input IP, and press Enter to confirm; then set IPV4
Subnet Mask and IPV4 Gateway Address in the same way;
(4)
Select Exit -> Save Change Without Exit option to save, it takes effect immediately.
7.2.4 Security
Security interface is used to set the options related with administrative security, including
TPM, administrator and user password settings, as shown in the following figure and table.
Summary of Contents for NF5288M5
