49
BIOS Settings
Table 6-16
Advanced > Network Stack Configuration > iSCSI Configuration >
Add an Attempt
Parameter
Description
Default Setting /
Format
iSCSI Mode
Enabled for MPIO.
Options: Enabled/Disabled
Disabled
Internet Protocol
This item is specific to IPv6.
Options: IP4/IP6/Autoconfigure
IP4
Connection Retry
Count
The minimum value is 0 and the maximum is
16. 0 means no retry.
0
Connection
Establishing Timeout
The minimum value is 100 milliseconds and
maximum is 20 seconds.
1000
OUT-format ISID
OUT-format ISID in 6 bytes, default value is
derived from the MAC address. Only last 3
bytes are configurable.
Configure ISID
Configure the out-format ISID
Enable DHCP
Enable/disable DHCP.
Options: Enabled/Disabled
Disabled
Initiator IP Address
Enter IP address in dotted-decimal notation.
0.0.0.0
Initiator Subnet Mask
Enter IP address in dotted-decimal notation.
0.0.0.0
Gateway
Enter IP address in dotted-decimal notation.
0.0.0.0
Target Name
The worldwide unique name of the target.
Only iqn. Format is accepted.
----
Target Address
Enter Target address in IPV4, IPV6 or URL
format. You need to configure the DNS server
address in advance if it’s a URL string.
----
Target Port
Target Port
3260
Boot LUN
Hexadecimal representation of the LU
number.
0
Authentication Type
Options: CHAP/Kerberos/None
None
Save Changes
System must be rebooted in order for
changes to take effect..
----
Back to Previous Page
Back to Previous Page
----
