perform the gyroscope calibration. During the calibration process, the
camera indicator will flash alternately between blue and green. After the
calibration is completed, the camera will automatically restart.
Shooting precautions
1. After upgrading the firmware for the first time (for the firmware upgrade
method, see the fourth section of the operation guide), be sure to do a
gyroscope calibration (see the eighth section for the gyroscope calibration
method), otherwise the anti-shake effect may be affected. Gyro calibration can
be done only once after upgrading the firmware version after 0.0.17.
2. After the firmware is successfully upgraded for the first time, the camera will
automatically turn on. But please don't shoot directly, you need to restart the
camera to be normal, otherwise the anti-shake effect may be abnormal if you
shoot directly.
3. At present, regardless of the 1080P high frame rate of 1/2.3" or 1" lens, the
picture quality is not very good. It is recommended to use only the stationary
position to shoot moving objects in a scene with good light.