6) Mounting your CatMouse
TM
:
Option #1
Keyhole Mounting:
a)
Tap in pin/nail provided. Place the
keyhole at the back of the CatMouse
TM
unit over the nail (fig. 3).
b)
Drill/punch a 3/16” hole in desired
mounting location. Press anchor firmly
into hole. Turn in the screw leaving
approx. 1/4” of the screw extending from
the wall. Place the keyhole at the back of
the CatMouse
TM
unit over the screw (fig. 3).
Option #2
Repositionable Hook & Loop
Mounting Strip:
Separate opposing
repositionable mounting strip sides.
Remove adhesive backing paper from
one side and attach to desired location.
Remove adhesive backing paper from
other side and attach to the CatMouse
TM
.
Secure unit to desired location (fig. 4).
Note:
Do not cover keyhole or labels with
mounting strips.
16
CATMOUSE
TM
operation & installation
figure 4
figure 3