Page 24 of 38
SPAN 500 BRIDGED TOWER
1. Push castor into adjustable leg.
Insert adjustable leg into a 4-rung frame and
lock the castor.
Repeat for all other castors.
It is recommended to allow a small gap
between the bottom of the adjustable leg and
the leg lock for ease of levelling.
2. Install one horizontal brace onto the vertical
tube of the frame, just above the collar with
the claw facing outwards. This will support the
fame.
Release brace latch for ease of fitting.
3. Fit horizontal brace onto the opposite vertical
tube of the frame. Position the ladder as
shown and attach horizontal brace to the
other 4-rung frame.
Ensure the frames are square and level by
checking with a spirit level and adjusting the
legs if required.
When tower is level and square, apply the
braces as shown.
5m ASSEMBLY PROCESS
