8
1.
Put the funnel with the small brewing basket installed into the
appliance, then place the coffee capsule and close the top cover. The
“Magnetic induction switch (11)” is activated, and the “K-CUP
indicator (7)” illuminates in blue at half brightness, meanwhile, the
indicator of the default cup size “8OZ” flashes.
2.
Turn the “Cup holder (10)” downwards and place it on the warming
plate. The K-CUP coffee-brewing program can be only activated when
the “Magnet (17) gets close to the “Magnetic induction switch (11)” of
the appliance.
3.
You can turn the “Cup size knob (1)” to select your desired cup size
(8OZ, 10OZ or 12OZ), and the corresponding indicator of the selected
cup size will flash.
4.
Press “START/STOP button (2)” and the appliance starts to brew
coffee. At that time, the “K-CUP indicator (3)” illuminates at full
brightness and the indicator of selected cup size illuminates solidly.
And the appliance will keep running until the brewing program is
finished. And the appliance will go back to the standby mode after the
brewing program is finished.
CLEANING AND MAINTENANCE
CLEAN THE WATER TANK
Remove the water tank and then turn it upside down on the sink to
empty the remaining water. It is recommended to empty the water tank
before and after use. Wash the water tank with soapy water, rinse
thoroughly and dry. Do not put the water tank in the dishwasher.
CLEAN THE APPLIANCE
1. Wipe the housing with a piece of soft wet cloth. Do not use abrasive
cleaning agent or cleaning cloth because they will scratch the surface
finish.
2. Detachable parts such as small brewing basket and funnel can be
directly washed with water or put into dishwasher for cleaning.
NOTE:
Do not immerse the appliance in water.
