4
IMPORTANT NOTES
Check the running condition of appliance under drip
coffee-brewing mode
1.
Fill the “Water tank (16)” with water, of which level should not
exceed the “MAX” mark on the “Water tank (16)”.
2.
Connect the appliance with power source, the “DRIP indicator (3)”
illuminates in red at half brightness and “10CUP/8OZ indicator (4)”
flashes.
3.
Place the Funnel (14) well in position and close the top cover.
4.
Place the “Glass carafe (8)” attached well in position and select the
desired cup size. Make sure the “Cup holder (10)” shall be turned
upwards, otherwise the program can not be activated.
5.
Press the “START/STOP button (2)”.
6.
The “DRIP indicator (3)” illuminates at full brightness, and the
indicator of selected cup size lights solidly. The appliance starts to brew
coffee until the program is ended, then the “DRIP indicator (3)”
illuminates at half brightness and the appliance enters into the 2-hour
keep-warm mode. After finish keeping warm, the indicator of selected
cup size flashes, which means that the appliance goes back to the
standby mode.
Check the running condition of appliance under
K-CUP coffee-brewing mode
1.
Fill the “Water tank (16)” with water, of which level should not
exceed the “MAX” mark on the “Water tank (16)”.
2.
Connect the appliance with power source, the “DRIP indicator (3)”
illuminates in red at half brightness and “10CUP/8OZ indicator (4)”
flashes.
3.
Place the funnel loaded with the small brewing basket well in
position, the “K-CUP indicator (7)” illuminates in blue at half
brightness, close the top cover well.
4.
Turn the Cup holder downwards to make it be placed on the
warming plate, otherwise the program can not be activated.
5.
Place a ceramic cup or travel up well in position and select the
desired cup size.
6.
Press the “START/STOP button (2)”
7.
The “K-CUP indicator (7)” illuminates at full brightness, and the
indicator of selected cup size lights solidly. The appliance starts to brew
coffee until the program is ended, then the “K-CUP indicator (7)”
illuminates at half brightness and the indicator of selected cup size
flashes, which means that the appliance goes back to the standby mode.
