10
Your Multi-function coffee maker
To turn
Altitude Mode
off
1.
Make sure your Instant Multi-function coffee maker is on.
2.
Press and hold the
8 oz
and
10 oz
buttons at the same time for
3 seconds.
3.
Wait until the
8 oz
and
10 oz
buttons blink twice.
Low water alert
While or after brewing, your coffee maker will notify you the water
tank is nearly empty. If this happens during a brewing cycle, the Water
LED on the control panel will start flashing and the brewing program
will continue.
While in this low water state, both the Water LED and Power button will
remain lit. You cannot run another brewing program until you add water
to the tank.
Adding water
1.
Either remove the water tank from the coffee maker or leave the tank
on the unit
.
2.
Fill the water tank with clean, cold water.
3.
Place the water tank back onto the coffee maker or close the water
tank lid.
4.
Begin brewing your next cup of coffee.
You must add water before brewing your next cup of coffee.
DO NOT
operate this coffeemaker without water in the water tank.
140-6013-01-0101_DualPodPlus_CoffeeMaker_US_Manual_FINAL.indd 10
140-6013-01-0101_DualPodPlus_CoffeeMaker_US_Manual_FINAL.indd 10
7/14/21 4:10 PM
7/14/21 4:10 PM
