10
| support@instantappliances.com | 1-800-828-7280
Get started
Initial test run
Do you
have
to do the test run? No — but getting to know the ins and outs of your Omni
prepares you for success in the kitchen! Take a few minutes to get to know how this little
beauty works.
Stage 1: Setting up for cooking
01
Open the oven door.
Slide the cooking pan onto the
bottom rack position, and into the
cooking chamber.
Close the door.
02
Plug the power cord into a 120 V
power source.
The oven is in standby mode and the
display shows
OFF
.
03
Press the dial. When the
Air Fry
setting
blinks, the display will toggle between
the temperature and time. Press
the dial to select the
Air Fry
Smart
Program.
04
The temperature will flash
400°F
.
Don't change for this test run. Press
the dial and the
Time
will flash. Turn
the dial to change to 20 minutes
(
00:20
).
05
Press
Start
to begin.
The display shows
On
while the oven
preheats.
Stage 2: “Cooking” (…but not really, this
is just a test!)
01
When the oven reaches the perfect
temperature, it beeps and begins the
cooking countdown.
Don’t cook food during the test run.
02
Partway through cooking, the display
shows
turn Food
.
Wait 10 seconds for the program to
resume automatically, or, open and
close the oven door to pause and
resume the program manually.
When the oven door is open, the
display shows
OPEN
.
03
The oven counts down the last minute
of the cooking time in seconds.
When the Smart Program finishes,
the display shows
End
.
The fan may blow for a little while to
help cool the oven.
04
Open and close the oven door to
return to standby mode and start
cooking for real!
If you forget this last step, the toaster
oven will beep to remind you every
5 minutes for 1 hour.
That’s it! You’re good to go :)
CAUTION
Metal, glass surfaces and accessories will be hot during and after cooking. To
avoid burn injury, do not touch the appliance, or attempt to insert or remove
accessories without proper hand protection.
