14
Smart Programs
Sauté
The
Sauté
Smart Program lightly fries/browns foods using a small amount
of oil in the Inner Pot.
1.
With the cooker in Standby mode (Display reads “
OFF
”), press
Sauté
.
Display will read “
HI
” or “
LO
”. Press
Sauté
again to toggle between
“
HI
” and “
LO
” temperatures.
2.
Press [
−
/
+
] to adjust
Sauté
program cooking time in increments of
1 minute to a maximum of 30 minutes.
3.
Press
Start
to save cooking time and temperature and begin cooking.
Note
:
Delay Start
and
Keep Warm
are not available when using the
Sauté
Smart
Program.
Slow Cook
The
Slow Cook
Smart Program brings the cooker up to cooking temperature
slowly and continues cooking at that temperature for a maximum of 24 hours.
1.
With the cooker in Standby mode (Display reads “
OFF
”), press
Slow Cook
.
Display will read “
HI
” or “
LO
”. Press
Slow Cook
again to toggle between
“
HI
” and “
LO
” slow cooking programs.
Optionally, press
Keep Warm
to turn the
Keep Warm
program OFF.
Keep Warm
is ON by default and the cooker will automatically keep
food warm for a maximum of 10 hours after the Smart Program has
completed. Press Cancel to end
Keep Warm
at any time.
Optionally, press
Delay Start
to delay the start of the Smart Program.
Delay Start
is OFF by default. Turn ON by pressing the
Delay Start
control. Use the [
−
/
+
] controls to adjust the delayed start time in
increments of 10 minutes to a maximum of 24 hours.
2.
Press [
−
/
+
] to adjust the
Slow Cook
program cooking time in increments
of 10 minutes to a maximum of 24 hours.
3.
Press
Start
to save cooking time and temperature and begin the
Slow Cook
program.
WARNING
To ensure that foods are fully cooked, the
Slow Cook
Smart Program must reach the
target temperature. DO NOT adjust Slow Cook time to less than 4.5 hours for “LO” or
2.5 hours for “HI”.
