22
Troubleshooting
Register your product today at
instantappliances.com/support/register
.
Problem
Possible Reason
Try This
Display remains blank
after connecting the
power cord.
Bad power connection
or no power.
Inspect power cord for damage. Do not use
if the power cord is damaged in any manner.
Check outlet to ensure it is powered.
Cooker’s electrical fuse
has blown.
Contact Customer Care.
Difficulty opening the lid.
Lid release
Press down the lid release button on the lid
handle, then lift up to one side. The lid is not
removable.
Rice or grain is
chewy, too hard, or
undercooked.
Lid was opened too
early.
After cooking completes, open the cooker
and quickly fluff the rice or grains, then close
the lid and let the cooker sit for an additional
5-10 minutes.
Not enough water or
liquid.
Add ½ to 1 cup water, mix, and run the
cooking program again.
Rice or grain requires a
longer cooking time.
Run the cooking program a second time.
Rice or grain is too soft,
or overcooked.
Too much water or
liquid.
Stir the rice or grain to redistribute the
cooking liquid. Close the lid and run Keep
Warm for 10-30 minutes as required, stirring
occasionally.
Rice or grain was
cooked for too long.
Refer to recipe instructions.
Error code appears
on display, cooker
beeps and lights
flash continuously.
E1
Faulty sensor
detected.
Contact Customer Care.
E3
Faulty sensor
detected.
Contact Customer Care.
If the problems persist or for any service issue, contact an authorized service
representative at
support@instantappliances.com
, create a support ticket
at
instantappliances.com/support
or call
1-800-828-7280
to speak with
Customer Care.
CAUTION
Do not attempt to service the appliance yourself.
