Registered Office: Unit 17/18 Gunnels Wood Park, Gunnels Wood Road, Stevenage, Herts SG1 2BH, UK • Registered No. 4388957 • VAT No. 795788835
Installation – Podium (guide only)
1. Remove podium from box.
2. Remove the black plate on top of the podium, a simple POZI or
Philips screwdriver is all that is needed.
3. Remove Instascan unit from packaging and unscrew locking nut on
the lower section of the mounting podium.
4. Feed cables from Instascan unit through black mounting plate from
mounting podium.
5. Feed the cables back through the locking nut you removed in step
3 and tighten locking nut up so unit is secured in place. Make sure
the face of the Instascan unit is facing the side of the plate with no
screw holes.
6. Now the Instascan unit is secured to the mounting plate you need
to hold the unit in place near the top of the mounting pole and
connect the power connector from the mounting pole to the
corresponding connection coming from the unit.
7. Once connected carefully feed excess cable into the mounting
podium and place the Instascan unit with mounting plate attached
back in position on top of mounting podium. Secure in position with
the screws you removed in step 2.
8. You can now power up the unit. In the box the unit arrived in, you
will find the plug/power supply. Remove this from its box and
connect to corresponding connection on the base of the mounting
podium.