background image

Personal Safety

Do not permit children to use this product unless they are

closely supervised at all times. Extreme caution must be

exercised to prevent unauthorized access by children.

• Pets should be kept away from InstaSPA to avoid damage or

drowning.

• The maximum Spa temperature is designed to not exceed 40

degree C (104 degree F) which is considered safe for a healthy

adult. Lower water temperatures are recommended for young

children.

• Prolonged immersion in hot water may induce hyperthermia.

Hyperthermia occurs when the internal temperature of the body

reaches a level several degrees above the normal body

temperatures of 37 degree C ( 98.6 degree F). Symptoms of

hyperthermia includes dizziness, lethargy, drowsiness and

fainting. The effects of hyperthermia include failure to perceive

 heat, failure to recognize the need to exit the spa, unawareness

of impending hazard, fetal damage in pregnant women, physical

inability to exit the spa, and unconsciousness resulting in

drowning.

• The use of alcohol, drugs or medication can greatly increase the

risk of  fatal Hyperthermia.

• Excessive water temperatures have a high potential for causing

fetal damage during the early months of pregnancy. Pregnant or

possibly pregnant women should limit spa water temperatures

to 38 degree C (100 degree F) and check with their doctor before

use.

• The use of alcohol, drugs or medication before or during spa use

may lead to unconsciousness with the possibility of drowning.

• Persons suffering from obesity or with medical history of heart

disease, low or high blood pressure, circulatory system problems,

or diabetes should consult a physician before using a spa. Persons

using medication should consult a physician before using a spa

since some medications may induce drowsiness while other

medication may affect heart rate, blood pressure, and circulation.

Operational Safety

• Handle the motor unit gently. The components inside may incur

damage if dropped.

• The water level must be 2” above suction valves or the motor

could overheat and void the warranty.

• Never use sharp utensils in or around the InstaSPA. Sharp objects

can puncture the vinyl.

• Install the InstaSPA only on floors or areas that can withstand

repeated exposure to water. Splashing and dripping water during

standard use or during filling and draining are routine operations.

Equipment failure may also cause substantial water spillage. Care

must be taken to protect all items that are near the spa or located

below the spa in a multi-floor structure in the event of a water spill.

• Place only on surfaces that can withstand the floor loading

requirements of your spa. Note: A spa, full of water, with six 200lb

adults weighs approximately 3450lb (1565Kg). If you do not know

the rating of the floor, deck, or balcony, consult an architect or

engineer before filling.

Important - Circuit Interupter Check

USA operation. Do NOT operate without the GFCI

(Ground-Fault Circuit-Interrupter) which is factory-

attached to the end of the power cord. This safety

device shuts off the power in a fraction of a second in the

event of an electrical short. The GFCI must be tested before

each use. With the Spa plugged in and operating, push the

test button. The unit should stop operating. Push the reset

button. The unit should now operate normally. If the

interrupter fails to operate in this manner, there is a

possibility of an electrical shock. Disconnect the power plug

and call a spa service company. Do not use the Spa until the

fault has been identified and corrected. Do not open the motor unit or the

GFCI. There are no user serviceable parts inside. Opening either component

will void the warranty.

General Electrical Safety Instructions

• Do not place Spa power cable in heavy-traffic area.

• Connect to a grounded outlet only. Contact a qualified electrician if you

cannot verify that the receptacle is grounded correctly.

• Use only 3 wire extension cords that are at least 16 AWG to connect the

motor unit to the power source. Extension cords that are rated less than

this, will cause a voltage drop which may cause damage to the pump

motor and controls.

• Do not touch the power cord, the motor, or the controller when your

hands are wet.

• Do not permit any electric appliance, such as a light, telephone, radio, or

 television, within 5 feet (1.5M) of a spa.

• Always unplug your motor unit before draining and while filling.

• Replace a damaged power cord immediately.

• Do not bury power cord. Place cords where they will NOT be damaged

by the lawnmower, hedge trimmer and other cutting tools.

• Use only approved accessories or could void the warranty.

Water Chemistry

Maintain proper water pH (7.2 – 7.8) for your spa. Do NOT use SHOCK.

These chemicals are too strong for the spa. Using shock will void your

warranty.

Safety Precautions

Reading and understanding these safety instructions will reduce the risk of

causing inadvertent damage to your InstaSPA, your surroundings, and yourself.

DANGER- Risk of Injury! Read the following safety instructions very carefully.

2

InstaSPA

InstaSPA

InstaSPA

Summary of Contents for Air Cloud













Reviews: