INSTEON-compatible AccessPoint User’s Guide
ABOUT INSTEON ACCESSPOINT
Congratulations on purchasing the INSTEON-compatible AccessPoint. Installing at least two
AccessPoints in your INSTEON enabled home will improve INSTEON signal strength and network
coverage throughout your home, and provide an interface between wireless-only INSTEON devices and
your overall INSTEON network. AccessPoints also tie together your dual-mesh INSTEON network by
transmitting INSTEON signals across radio-frequency to bridge your home’s powerline wiring phases.
SET Button
Status LED
What is INSTEON?
INSTEON is a simple, reliable, and affordable breakthrough in home control. Simple, because Plug-n-
Tap
™
setup is a breeze, and there are no wires to add – INSTEON uses existing powerline wiring as well
as radio-frequency for communication. Reliable, because every INSTEON device is a two-way repeater.
And affordable, not just because of low cost, but because INSTEON also works with legacy X10 devices.
An INSTEON home grows in value with every INSTEON device you add, making life more convenient,
safe and fun.
Key AccessPoint Features
•
Setup is easy – AccessPoints install in minutes
•
Communicates simultaneously over both radio-frequency and the powerline
•
Couples INSTEON messages across opposite powerline phases
•
Uses the reliable 900MHz band for superior through-wall transmissions
•
Expands INSTEON networks to support large or complex installations
•
Shows INSTEON activity with a white status LED
•
Approved by the FCC and ETL, manufactured in an ISO 9001:2000 facility
•
Warranted for two years
Page 3 of 12
