42
42
4.2.4 Multi-Camera
If you want to view multi-surveillance screens on one window, you need to login one camera, and set it as the
main device, and do Multi-Device Settings, add other cameras to the first one camera. Before you do
multi-cams settings, you need to assign different port such as 81, 82, 83, 84, 85, 86, 87, 88 to the cameras if
there is 8 cams installed.
Your rooter may be limited to less cameras depending on bandwidth.
Add cameras in LAN
In Multi-Device Settings page, you can see all devices searched in LAN. The 1st Device is the default one. You
can add more cameras in the list in LAN for monitoring. The camera’s software supports up to 9 IP Cameras
online simultaneously. Click
The 2nd Device
and click the item in the
Device List in LAN
, the Alias, Host and
Http Port will be filled in the boxes below automatically. Enter the correct username and password then click
Add
. Add more cameras in the same way.
Figure 4.11
1 Click it, camera model, alias,
host and HTTP Port will be
filled in the following boxes
automatically
2 Enter the User name and
password of the 2nd
camera
3 Click Add to take effect