55
55
If the camera cannot be accessed, please make sure the port forwarding is successful.
HTTPS port:
The default port is 443. You can use the url to access the camera:
https:// IP + HTTPS port.
4.3.7 Mail Settings
If you want the camera to send emails when motion has been detected, here Mail will need to be configured.
Figure 4.33
1----- SMTP Server/ Port /Transport Layer Security
Enter SMTP server for sender.
SMTP
port is usually
set as 25. Some SMTP servers have their own port, such as 587 or 465, and Transport Layer Security usually
is None. If you use Gmail, Transport Layer Security must be set to TLS or STARTTLS and SMTP Port must be
set to 465 or 25 or 587, which port you choose should be decided by which Transport Layer Security you
select.
2-----SMTP Username/ password
ID account and password of the sender email address
3----- Sender E-mail
Mailbox for sender must support SMTP
4----- Receiver
Mailbox for receiver need not support SMTP,you can set 4 receivers
5---- Save
Click Save to take effect
6---- Test
Click Test to see if Mail has been successfully configured.
Click
Test
to see if Mail has been successfully configured.