background image

17

Product Warranty

Limited Warranty

Seller warrants to the original consumer purchaser of this product that, for a period of two years from the date 

of purchase, this product will be free from defects in material and workmanship and will perform in substantial 

conformity to the description of the product in this Owner’s Manual. This warranty shall not apply to defects or 

errors caused by misuse or neglect. If the product is found to be defective in material or workmanship, or if the 

product does not perform as warranted above during the warranty period, Seller will either repair it, replace it, 

or refund the purchase price, at its option, upon receipt of the product at the address below, postage prepaid, 

with proof of the date of purchase and an explanation of the defect or error. The repair, replacement, or refund 

that is provided for above shall be the full extent of Seller’s liability with respect to this product. For repair or 

replacement during the warranty period, call 866-243-8022 with the Model # and Revision # of the device to 

receive an RMA# and send the product, along with all other required materials to: 

Insteon 

ATTN: Receiving 

16542 Millikan Ave. 

Irvine, CA 92606-5027

Limitations

The above warranty is in lieu of and Seller disclaims all other warranties, whether oral or written, express or 

implied, including any warranty or merchantability or fitness for a particular purpose. Any implied warranty, 

including any warranty of merchantability or fitness for a particular purpose, which may not be disclaimed 

or supplanted as provided above shall be limited to the two-year of the express warranty above. No other 

representation or claim of any nature by any person shall be binding upon Seller or modify the terms of the 

above warranty and disclaimer. 

Home automation devices have the risk of failure to operate, incorrect operation, or electrical or mechanical 

tampering. For optimal use, manually verify the device state. Any home automation device should be viewed as 

a convenience, but not as a sole method for controlling your home. 

In no event shall Seller be liable for special, incidental, consequential, or other damages resulting from 

possession or use of this device, including without limitation damage to property and, to the extent permitted by 

law, personal injury, even if Seller knew or should have known of the possibility of such damages. Some states 

do not allow limitations on how long an implied warranty lasts and/or the exclusion or limitation of damages, in 

which case the above limitations and/or exclusions may not apply to you. You may also have other legal rights 

that may vary from state to state. 

Protected under U.S. and foreign patents (see www.insteon.com/patents) 

© Copyright 2015 Insteon

Rev 11.20.15

Summary of Contents for 2867-222


















Reviews: