Page 13 of 15 2342-x32 Rev: 11/20/2012 4:13 PM
Mechanical
Color
White
Plastic
UV Stabilized ABS
Dimensions
6.6cm x 3.3cm x 1.0cm
Weight
28g
Button Style
Plastic Paddles over Contact Switches
Optional Hardware
Wall Mount
Tabletop Stand
Visor Clip
Operating Environment
Indoors, 0°C to 40°C, up to 85% relative humidity
Electrical
Battery type
3.7 VDC Lithium Polymer, Rechargeable, non-replaceable
Battery life (between charges)
9-12 months under standard usage
Battery Re-charging cycles
> 500 recharging cycles
Recharging jack
Standard, Micro-USB, 5VDC
Recharging time
1 hour
Troubleshooting
Problem
Possible Cause
Solution
Mini Remote won’t add a
scene responder
Mini Remote may be out of range of
nearest INSTEON device
Try moving Mini Remote closer to responder
Mini Remote will not turn on a
responder (it may turn it off)
Responder ramp rate may be
extremely slow
Relink to responder with faster ramp rate
Responder may be linked at off
Relink to responder, making sure it’s linked at on
Responder’s load doesn’t
appear to turn on right away
Responder ramp rate may be set
too slow
Relink to responder with faster ramp rate
Responder(s) is taking a long
time to respond to a Mini
Remote
Mini Remote may be sending
commands to a responder(s) that is
no longer in use
Remove all unused responders from the Mini
Remote. HINT: If you are using home automation
software, you can easily check scene membership
and eliminate unnecessary links.
If the above doesn’t work, try the solutions for “Mini
Remote will not turn on a responder.”
Mini Remote blinks red after I
turn a scene on or off
One or more scene members is not
responding
Monitor for recurrence and if recurs:
a) Remove all scene responders that are no
