background image

                                                          Page 15 of 15                                      2342-x32 Rev: 11/20/2012 4:13 PM 

 

Limited Warranty 

Seller warrants to the original consumer purchaser of this product that, for a period of two years from the date of purchase, this product will be free 
from  defects  in  material  and  workmanship  and  will  perform  in  substantial  conformity  to  the  description  of  the  product  in  this  Owner’s  Manual.  This 
warranty shall not apply to defects or errors caused by misuse or neglect. If the product is found to be defective in material or workmanship, or if the 
product  does  not  perform  as  warranted  above  during  the  warranty  period,  Seller  will  either  repair  it,  replace  it,  or  refund  the  purchase  price,  at  its 
option, upon receipt of the product at the address below, postage prepaid, with proof of the date of purchase and an explanation of the defect or error. 
The  repair,  replacement,  or  refund  that  is  provided  for  above  shall  be  the  full  extent  of  Seller’s  liability  with  respect  to  this  product.  For  repair  or 
replacement during the warranty period, call the INSTEON Gold Support Line at 800-762-7845 with the Model # and Revision # of the device to receive 
an RMA# and send the product, along with all other required materials to:  

 
INSTEON 
ATTN: Receiving 
16542 Millikan Ave. 
Irvine, CA 92606-5027 

Limitations 

The  above  warranty  is  in  lieu  of  and  Seller  disclaims  all  other  warranties,  whether  oral  or  written,  express  or  implied,  including  any  warranty  or 
merchantability or fitness for a particular purpose. Any implied warranty, including any warranty of merchantability or fitness for a particular purpose, 
which may not be disclaimed or supplanted as provided above shall be limited to the two-years of the express warranty above. No other representation 
or claim of any nature by any person shall be binding upon Seller or modify the terms of the above warranty and disclaimer.  
Home automation devices have the risk of failure to operate, incorrect operation, or electrical or mechanical tampering. For optimal use, manually verify 
the device state. Any home automation device should be viewed as a convenience, but not as a sole method for controlling your home.  

In  no  event  shall  Seller  be  liable  for  special,  incidental,  consequential,  or  other  damages  resulting  from  possession  or  use  of  this  device,  including 
without limitation damage to property and, to the extent permitted by law, personal injury, even if Seller knew or should have known of the possibility of 
such damages. Some states do not allow limitations on how long an implied warranty lasts and/or the exclusion or limitation of damages, in which case 
the above limitations and/or exclusions may not apply to you. You may also have other legal rights that may vary from state to state.  

Protected under U.S. and foreign patents (see 

www.insteon.com

© Copyright 2012 INSTEON, 16542 Millikan Ave., Irvine, CA 92606, 800-762-7845, www.insteon.com 

 

Summary of Contents for Mini Remote 2342-432































Reviews: