Page 7 of 15 2342-x32 Rev: 11/20/2012 4:13 PM
LED will begin blinking red
4) Press and hold responder set button until it double-beeps and/or its LED blinks
Mini Remote will double-beep and its LED will stop blinking
5) Confirm that scene removal was successful by tapping the Mini Remote button on/off
Responder will not respond
6) If you wish to add more responders to Mini Remote, repeat steps 1-5 for each additional scene
responder (or see
Remove Mini Remote as a Controller of Multiple Responders
)
Using Mini Remote
4 Scene Mode (Default)
Each on/off button pair controls its scene members as follows:
Button
Side
Icon
Tap
Press and hold
Double-tap
On
Right
^
Turn scene on
Brighten until release
(dimmable responders only)
Instant full-on
Off
Left
v
Turn scene off
Dim until release
(dimmable responders only)
Instant full-off
8 Scene Toggle Mode
Each button controls its scene members as follows:
Last Command Sent
Tap
Press and hold
Double-tap
Off/Dim
Turn scene on
Brighten until release
(dimmable responders only)
Instant full-on
On/Bright
Turn scene off
Dim until release
(dimmable responders only)
Instant full-off
8 Scene Non-Toggle Mode (Always On)
Each button controls its scene members as follows:
Tap
Press and hold
Double-tap
On
Brighten until release
(dimmable responders only)
Instant full-on
Note: Devices that respond to the scene trigger by turning off and non-dimmable devices will not respond
to dim and brighten commands.