WARNING AND SAFETY INSTRUCTIONS
Before assembling your LED Lighted Mirror fixture, please make sure that you carefully
read through this instruction sheet, refer back to them during installation to ensure your
product is fitted safely and correctly. Keep these instructions for future use.
WARNING
Risk of Fire and Electric Shock
●All fittings must be installed in accordance with current IEE wiring regulations. If in
doubt, consult a qualified electrician.
●Switch off the electrical supply at the main circuit board BEFORE installation and
maintenance.
●Suitable for indoor use only. This product should be positioned well away from curtains
and fabrics. Never cover the mirror.
●Regularly check the cord, the transformer and all other parts for damage, if any part is
damaged the product should not be used.
INSTALLATION SAFETY
●Inspect the product immediately upon receipt for the transit damage or missing parts.
Handle the product with care and protect against knocks to all sides and edges of the
glass.
●Ensure there are no hidden pipes or cables in the wall before drilling.
●Wear suitable eye protection when drilling. Take care if drilling on tiled surfaces in case
the drill slips.
CAUTION
The light source of this product is non-changeable light diodes (LED). Do not disassemble
the product, as the light diodes can cause damage to the eyes.
NOTE: The important safeguards and instructions that appear in this manual are not
meant to cover all possible conditions and situations that may occur. It must be
understood that common sense, caution and care are factors that can't be built into any
product. These factors must be supplied by the person(s) caring for and operating the
fixture. Do not install this fixture in hazardous locations.
Important Tips
