INSTYLE.COM.AU
ASSEMBLY INSTRUCTIONS
Step 1
Carefully slide both Intersect posts through
the Intersect base, avoiding contact between
the posts and the base until the post feet
come into contact with the base
Step 2
Fasten each of the 8 short base screws
supplied through the post feet into the
Intersect base
Step 3
Remove Intersect panels from protective
surrounds
Step 4
Position the Intersect 5-edged panel between
the Intersect posts with short edge of the panel
aligned horizontally onto the base
Intersect posts
Intersect base
Felt disc pad
Post feet
8 short (base) screws
Intersect panel
Protective surrounds
10 long (panel) screws
5 edged panel
Step 5
Align panel holes with post threads and
lightly fasten 10 of the 20 long (panel)
screws supplied into the posts through the
5-edged panel
Ecoustic
®
Intersect Installation
