INSTYLE.COM.AU
ASSEMBLY INSTRUCTIONS
Step 6
Lower the 4-edged Intersect panel over the
installed panel ensuring the slots of each
panel intersect.
Step 7
Align holes of the 4-edged panel with post
threads and lightly fasten remaining 10
long (panel) screws supplied into the posts
through the 4-edged panel.
Step 8
Check both Intersect panels are resting on
the face of each post, then finally check
tighten all 20 of the long (panel) screws.
Your Intersect Partition is now complete!
Important:
Please handle Intersect Partitions
by holding onto the posts rather than the
panels.
4-edged Intersect
panel
10 remaining long
(panel) screws
Ecoustic
®
Intersect Installation
