AT Command Reference
INSYS GSM small 2.0
Command
Description
AT+CGREG=<n>
Configuring the GPRS network registration state display
<n>
Unsolicited result codes for GPRS network registration state
0
No unsolicited result codes
1
Display unsolicited result codes
2
(Only with change of registration state)
After entering the command AT+CGREG? or with unsolicited result codes
activated <n> = 1 the following parameters are displayed:
<n>
see
above
<stat>
GPRS network registration state
0
Not registered, GPRS terminal device disabled
1
Registered in home network
2
Not registered, search for operator
3
Registration denied by provider
4
Unknown
5
Registered via roaming
The setting is not stored with
AT&W
.
AT+CGSMS?
Displaying transmission service for outgoing SMS
AT+CGSMS=......
Configuring transmission service for outgoing SMS
AT^SGACT?
Displaying activation states of active PDP contexts
AT^SGAUTH?
Displaying PPP authentication method
AT^SGAUTH=<auth
>
Configuring PPP authentication method
<auth>
0
No
authentication
1
PAP
2
CHAP
3
PAP and CHAP
The setting is not stored with
AT&W
.
76