INSYS ISDN TA 4.0
Functions
9.12
Outputting CLIP of Incoming Calls
The INSYS ISDN TA 4.0 can output the phone number of incoming calls via its
serial interface using CLIP (Calling Line Identification Presentation). This function
can be used for example to acknowledge messages, which are sent to a mobile
phone by an application via the INSYS ISDN TA 4.0. The CLIP of the caller is output
in the format [xxxxxxxx].
Configuration with HSComm
This function can only be configured via AT commands.
Configuration with AT commands
In order to display the phone number vie
CLIP using the extended responses, use the
command
ATW1
In order to define, which type of incoming
calls are to be indicated use the command
AT#C2
In order to indicate all calls, use the com-
mand
AT#C2=00000001
In order to output the number of the last
caller, use the command
AT#O
In order to indicate only analogue calls for
example, use the command
AT#C2=00030012
61
