22
Implementation and Configuration INSYS WLAN serial
Interface
Setting of the serial interface which is
used at the configuration PC. The
baud rate and the format (data bits,
stop bit, parity) have to match the
settings of the serial interface at the
INSYS WLAN serial.
If a remote configuration is
performed via WLAN, select Telnet
and enter the IP address of the device
that is being configured. In addition,
the user name and the password
which were stored in the INSYS WLAN
serial or which were set by the
manufacturer must be specified. (see
Chap. 6.1.3.3)
Language
Selection of the HSComm user interface
language: German or English. The setting
has no effect on the functionality of the
INSYS WLAN serial.
Overview
All current settings of
the INSYS WLAN serial
are clearly displayed.
The output extends
over several screen
pages and can be saved
as text file.
Note!
Read out the settings of your device and have this overview ready when
contacting our hotline!
version 1.01 / 10.04