© Intatec Ltd 2016
11
Aftercare
• With all highly polished items, care should be taken not to damage any of the external
surfaces.
• We recommend that to ensure the physical appearance of the product and component parts
that it is periodically cleaned with a soft damp cloth and a mild detergent. The use of abrasive
or solvent cleaners will damage the finish of the product.
• We recommend periodically that the flow straightener is cleaned using a suitable scaling
solvent. Check first it does not affect the plated surface.
• The internal bore of the flow straightener must be periodically wiped using a damp cloth.
• We recommend that this fitting is serviced at least once a year.
• Only use genuine spare parts, the full list is available on request by ringing the Technical
Helpline number on the back page.
Removing Spout
The HTMWMRS wall mounted and HTMDMRS deck mounted taps have a removable spout to
assist with cleaning, disinfection by immersion or sterilisation in an autoclave.
Inta recommend that a replacement spout is available as the tap should not be left without
a spout (HTMSP16XX).
Cleaning, disinfection and sterilisation is only necessary if there is evidence of solid deposits
around the outlet from the tap or a minimum of once per year.
• Ensure the isolation valve in both supplies to the tap are in the closed position and the lever is
also in the closed position to prevent water flow and potential flooding.
Internal bore
in flow
straightener
Summary of Contents for HTMDMCP
Page 23: ...Intatec Ltd 2016 22 Notes...
