© Intatec Ltd 2014
3
Technical Data
This Inta i-sport compact shower panel is suitable for using recirculating hot water systems and
from a calorifier or hot water storage cylinder.
Water pressure range: 1 to 6 bar
Recommended water pressure range: 2 to 4 bar
Water temperature range: 5 to 65˚C
Water flow time: 30s +5/-10 seconds
Flow rate with flow regulator fitted: 8 l/m
Inlet Connections: G½B
General Recommendations
• Do not expose the shower to temperatures lower than 5°C (for example during winter time):
otherwise drain the system and any water residue.
• Adequate provision must be made to ensure the water quality (including limescale) when
installing the shower; the presence of impurities may damage the self-closing cartridge.
• If the system has not been used for a prolonged period, purge the up-streaming water supply,
before operating the shower.
• A service valve and check valve should be installed in the water supply pipework, should
maintenance be required in the future.
• For premixed water a thermostatic mixing valve should be fitted, preferably TMV3 such as an
Intamix with MX ends which include a ball isolating valve, strainer and single check valve.
• The flow time depends directly on the water pressure: the declared flow time refers to a 3 bar
dynamic pressure, according to European norm.
www.divapor.com
