© Intatec Ltd 2020
3
Pre-installation Information
Warning
Do not install the tap facing a mirror or any other electronic system operated by an infra red
sensor.
This tap is also vulnerable to stray sensor readings from users wearing high visibility or other
reflective clothing.
To prevent reflection problems, it is recommended to keep a minimum distance of 1.5m
between the tap and other objects.
Preparation for installation
Flush the water supply pipes thoroughly prior to installation. Do not allow debris, PTFE tape or
any metal particles to enter the tap.
Do not expose to temperatures below 5˚C, for example during winter. If the tap will be
exposed to freezing conditions the tap and system should be drained.
Important:
All plumbing is to be installed in accordance with applicable codes and
regulations.
Dimensions
72
63
G½B
162
80
90
Ø49
G½
Ø45
Ø69
