Inta IT1007CP, Nstallation And Maintenance Instructions

© Intatec Ltd 2022

3

Technical Data

    This Intatherm thermostatic mixer tap is suitable for installations on all types of plumbing 
    system, including gravity supplies, fully pumped, modulating combination boiler, unvented 
    water heater and unbalanced supplies i.e. Cold Mains & Tank Fed Hot. They are not 
    suitable for non-modulating combination boilers. 

    Max Inlet Pressure (Static)                10 bar       Max Unbalanced Pressure Ratio       15:1 
    Max Inlet Pressure (Dynamic)           5 bar         with flow regulator                           
    Max Inlet Temperature                     85˚C         Max Unbalanced Pressure Ratio       5:1 
    Pre Set Factory Temp Setting                             without flow regulator 
    with Max Temperature Stop             43˚C         Min Temp Differential between 
    Min Operating Pressure (Dynamic)   0.2 bar      hot inlet and mixed water outlet 
    Temperature Stability                       ±2˚C         to achieve cold water fail safe           10˚C

Dimensions

79

88.4

83.2

Ø49.5

M8

M10 x 1

101

152

RED dot

BLUE dot