intarblock | intartop
7
5. COMPOSITION
MCV / BCV units are built on a self-contained construction. The components are assembled on a steel
structure and covered with a prelacquered galvanised steel shell. It consists of:
Refrigerant circuit
§
Hermetic reciprocating compressor with internal protection, assembled on silentblocs
§
R404-A or R134a refrigerant load.
§
HP and LP pressure switches.
§
HP and LP load nipples.
§
Thermostatic expansion valve (capillary tube in medium temperature models with power lower
than 1,5 HP (R404A) and 1 HP (R134a).
§
Antiacid dehydrating filter.
§
Evaporation coil in copper tubes and aluminium fins with stainless steel drain tray.
§
Condensation coil in copper tubes and aluminium fins.
§
Solenoid valve for the hot gas bypass.
§
Water drain bucket including hot gas coil for the automatic evaporation of drain water.
Air circuits
N/I version:
§
Direct driven axial fans with single phase motor. Dynamically equilibrated blades with protection
grill.
C version:
§
Direct driven centrifugal fans with single phase motor. Dynamically equilibrated rotor.
Electric board
§
Circuit breaker protection
§
Electric control XW270K with the following elements and features:
- transformer 230 VAC / 12 VCC,
- microprocessor,
- alarm relay,
- compressor relay,
- defrost relay,
- evaporator fan relay,
- cold room light relay,
- condenser fan relay,
- door switch digital input
- H/LP pressure switch input
- inside temperature NTC probe
- outside temperature NTC probe
- defrost NTC probe
- RS485 connection,
- programming key connection,
