Intec Printing Solutions - Manual for ColorCut flat bed series FB550 ..................................................................................... Page No: 32
3.5.1 Calibration of the Creasing Tool to the Cutting Tool (cont)
6.
Set the pressure for the Creasing Tool
so that it is easy to see the crease.
(In step 5 you pressed [
Enter
] twice
so the display should now show
HOME SCREEN- If the display is
showing MOVE X: xx , Y:xx, then
press the [
ENTER
] x2 key to bring
the cutter back online.)
Press the ’touchscreen’ panel on
TOOL2.
Then use the UP / DOWN keys to set the speed (to 300mm/s)) and use the Left /
Right keys to set the Force. (to 960 g)
The press the [
ENTER
] key to accept the settings.
7
.
Set the appropriate pressure for the
Calibration Pen Tool
(not too much
pressure or you may break the pen).
Press the ’touchscreen’ panel on
TOOL1.
Use the UP / DOWN keys to set the
speed. (to 600mm/s))
Use the Left / Right keys to set the
Force. (to 280 g)
The press the [
ENTER
] key to accept.
7.
Now press
[
MENU
] Tab
button on the bottom of the LCD
display to open the menu/setting
screen.
8.
Ensure the “
Align Tool2 to Tool1
”
is selected (has the arrow next to it,
and click the
[ENTER]
key to select.
9.
The “
Align Tool2 to Tool1”
screen
will appear to guide you thr ough
the calibration.
Summary of Contents for ColorCut FB1150 Series
