Intec Printing Solutions - ColorCut Pro User Guide for Intec ColorCut SC5000 ................................................................................................... Page No: 70
10.12.4 Creating TAGs (Cont.)
3
.
Select the new Media
Type (“
Tags 50mm”
)
10c
, Ensuring the
“
Tags 50mm
” media
type is selected
12a
set Use Tool to Cut
tool
12b
.
Set the
12d
Line Style
to “
Dashed Line
(Adjustable)
”
Complete the
Line
Style
profile by
setting a
Cut length
12e
to
50mm
and the
Gap Length
12f
to
1mm
.
This will create a
Material Type/
Action that when assigned to a line color will provide
a 1mm Tag every 50mm.
4.
Now the Material Type has been created, you must
apply
the material type
for creating tags to the line you wish to contain tags. Click on
8
Cut Setting
section, next to the Color GREEN
8i
, then select the NEW “
Tags 50mm
”
Material
Type/
Action
10c
and assign it to the Color Green. The preview (above)
2
updates
to reflect the NEW material type (
Tags 50mm
) that you created and will show the
line with gaps every 50mm (
Note
:
If your tags are small (such as 1mm) you may need to
make the tag slightly larger (3-5mm) to see it in the preview, then reduce it back to 1mm)
.
This will prevent the Green inside elements falling out of the sheet during cutting.
You could also assign the NEW “
Tags 50mm
”
Material Type/
Action it to
the Color red as well.
8k
However, the perimeter
cut line is usually a long
cut line and a tag every
50mm
2a
may create
a lot of tags - slowing
production and making
the element difficult to
easily pop out.
Therefore we
recommend you use
different colors in your
design for larger and
smaller elements when
you design your jobs. This will then enable you to use a new Material type with
less frequent tags for longer cut lines. (Detailed following).
12
11
8
8i
12e
12d
12f
10c
12a
12b
2
8k
2a
Summary of Contents for ColorCut SC5000 Series
