H
O
W
T
H
E
S
Y
S
T
E
M
W
O
R
K
S
8
FORCE/3
3.0 & 4.0 DP
How the System Works
AGITATOR:
The five-arm agitator is
essential in helping attain the high production
rates by conditioning and sweeping the
material into the airlock.
AGITATOR MOTOR:
The agitator
motor is attached to the gearbox which
produces the torque to power the Agitator
and Airlock components.
AIRLOCK:
The airlock picks up and
rotates the conditioned material into the air
stream of the blowers. Airlock seals must
be inspected and maintained in order to
ensure maximum blowing efficiency.
m
Keep all foreign objects out of
airlock to prevent seal or airlock damage
BLOWER(S):
Force/3 3.0 uses two
128 CFM blowers to develop a minimum
pressure of 3.0. The Force/3 4.0 DP uses
two 115 CFM blowers to develop a
minimum pressure of 4.0. The two
blowers are housed in one
assembly to create the needed
airflow for the material to be
discharged from the airlock. The
insulation material does not pass
through the blower, thus increasing
the life of the machine.
