12
PROBLEMS / SOLUTIONS
Problem
Cause
Solution
The i-Starter 4.0 is not fully
charged despite the LEDs
being switched on
If not used for a long period
of time, the device could not
be fully charged despite the
LEDs being on
Recharge the device by
connecting it to its charger for a
few hours
By pressing the push button,
the LEDs do not switch on
Low-voltage protection has
been activated
Connect the device to its
charger immediately
Q: How do I switch off the device?
A: The device shuts down automatically when it is not on charge or when the recharge
process is over.
Q: Why does the i-Starter 4.0 make some beep sounds after start up?
A: The i-Starter 4.0 signals a temperature increase: let it cool down for a few minutes.
Q How many times can I recharge my cell phone?
A: This device allows you to recharge your iPhone 6 up to 8 times on average.
Q: How long does the charger provided take to recharge the i-Starter 4.0?
A: If the device is completely dead, it may take up to 6 hours.
Q: How long does it take to recharge my mobile phone?
A: One hour is usually enough
Q: How many times is a 100% charged device able to start a mid-size petrol vehicle?
A: Up to 20 times. It depends on other factors such as temperature and the state of
the vehicle battery.
Q: How often shall I recharge it?
A: We warmly recommend you to charge it at least once every three months or after
each use.
MOST FREQUENTLY ASKED QUESTIONS
English
