- Segment conveyor-page 5.1
Operation
5.
5.
5.1 Safety information
Observe the safety instructions set out in chapter 2 “Safety” of this manual.
Define the responsibilities of the commissioning staff, and authorize them to refuse the
execution of unsafe instructions issued by third parties.
Only work on this
segment conveyor, if you were briefed regarding handling with respect to
your function.
Prior to commissioning, check the segment conveyor for correct settings and for all
required safety devices.
Basically no safety devices may be disabled, removed or bypassed.
Prior to shift start, briefed and trained personnel must check safety and protective devices
for proper condition. If deficiencies are detected, which impact the safety of the segment
conveyor, the segment conveyor must be shut down until these deficiencies are corrected.
Do not perform any cleaning activities after switching the segment conveyor on.
Operating personnel are not allowed to carry out any work on the electrical equipment.
Refer to the equipment signs and labels attached to the segment conveyor. Label: Lightning
flash.
Do not reach into the parts container while the segment conveyor is running.
Faulty machine components must be replaced as soon as possible. Please use the enclosed
spare parts list to identify required spare parts.
WARNING
