Instruction Manual
|
16
T: 303-833-6644
or
800-666-1611
www.inteccorp.com
Original Language - English
Problem
Likely Cause
Remedy
Foreign material causing jam in
hopper.
Remove power cords, clear jam,
and restart system.
Machine is on, yet no material
comes out of hose.
Slide gate is closed.
Open slide gate.
Insulation blockage in hose.
Turn system off, remove hose
and clear blockage.
Blower is off.
Turn blower on.
Air pocket in hopper is
preventing insulation from
feeding into agitators.
Disconnect electrical power.
Redistribute insulation material
inside hopper.
Airlock seal is worn.
Inspect airlock seals for cuts
and wear. Call Tech Support if
necessary.
Airlock has an obstruction
preventing insulation from
exiting.
Disconnect electrical power,
remove obstruction.
Variable Speed is ‘on’ and
Variable Speed Setting is below
100%, yet still a lot of air flow.
Blower #2 is on.
Turn Blower #2 off
Variable Speed Setting needs to
be decreased.
Reduce Variable Speed Setting
closer towards zero.
