Instruction Manual
|
8
T: 303-833-6644
or
800-666-1611
www.inteccorp.com
Original Language - English
b.
It is important to note that Blower #1 must be running for Blower #2 to function.
4.
Variable Speed Selection: The Variable Speed Button ring is illuminated green when Variable
speed is “ON” illuminated red when Variable speed is “OFF” The Variable Speed can be used to
vary the speed of the Primary Blower. The Variable Speed does not control the Auxiliary
Blower; the Auxiliary Blower is either full on, or off. To use the Variable Speed:
a.
Push the Variable Speed Button “ON” ring around the button should be green.
b.
Adjust the Variable Speed Setting to desired setting ranging from 100% to near 0%.
Note 1: To obtain maximum blower velocity and pressure, place the Variable Speed control in
the ‘off’ setting. Ring around button should be red. Placing the Variable Speed in the ‘off’
setting provides more power to your system’s primary blower when compared to having the
Variable Speed ‘on’ and Variable Speed Setting at 100%.
Wired Remote Operations: To utilize a wired remote on your system, you will want to set the Rotary
Control Switch to “WIRED REMOTE” and plug in the wired remote into the Remote Receptacle. Please
be aware that the Plug End and the Receptacle are a keyed fitting. Align the tabs on the plug to the
slots on the receptacle and insert plug into receptacle. Once fully inserted, gently turn the plug
clockwise
1/8
th
of a turn. You will hear a click. To remove your remote. Gentle pull back the silver
release tab with your thumb and rotate
counter-clockwise
1/8
th
of a turn. Do not force the plug to
turn. Once it stops gently pull straight out of the receptacle. Remember when using your Wired
Remote that Blower #1 must be running before you can turn on the Agitator. You can not turn Blower
#2 on or off from the remote unless it is turned on manually at the panel first. If that is the case, when
the Blower switch on the remote is turned off Blower #1 and #2 both shut off and will restart in unison
when turned back on from the remote. Turning off the Blower(s) will also stop the Agitator however
the Agitator can be turned off with the remote and the Blower(s) will still run. This allows the user to
blow out the hose.
