____________________________________________________________________________________________
(091214_Sp) Integra EPRO 1K-3K
-
15
BYPASS
If UPS is overloaded by big consuming
load connected at UPS output, UPS
changes to BYPASS mode feeding
outlets from input AC source. This mode
can be set also by front panel (by
selecting “ON/MUTE” + “SELECT” at
same time).
STAND-BY
* UPS is OFF
* No power in UPS outlets.
* Input AC source is OK.
* Batteries are been charged
10. ERROR / FAILURE CODES ON LCD
FAILURE / ERROR
CODE
ICON
Bus failure
01
Hi BUS Voltage
02
Low BUS Voltage
03
Bus Unbalanced
04
Soft-start Inverter Failure
11
Inverter: Hi Voltage
12
Inverter: Low Voltage
13
Inverter output short circuit
14
Battery Very High Voltage
27
Battery Very Low Voltage
28
Over Temperature
41
x
Overload: UPS power output capacity has been exceeded. Inverter
cannot supply output.
43