____________________________________________________________________________________________
(091214_Sp) Integra EPRO 1K-3K
-
9
Battery Mode: Also known as Inverter Mode. It is the mode when AC input source is out of range or black-out is
detected by the UPS. Under this mode power output is generated by UPS inverter that takes power from batteries.
There is no dead time (transition time is ZERO ms) related to switching from normal mode to battery mode since
load is always powered from inverter. This is main characteristic of an ONLINE UPS.
ECO Mode: This UPS also offer a third operation mode name ECO MODE. Under this mode (selectable by LCD
configuration menu) UPS works as OFF-LINE UPS. Load is powered from AC input and UPS only switch to battery
mode when input is out of range or in black-out status. Transition time from ECO mode to Battery mode is not zero.
Typically is about 4ms that is why ECO Mode is not recommended for critical applications.
6. FRONT LCD PANEL
Running Time in Battery Mode
Time symbol when battery mode is active
Indicates time in battery mode: H: hours, M: minutes, S: seconds
Failure Messages
Indicates failure detected
Indicates number code for detected failure. Error or Failure codes are listed
in this manual.
“MUTE”
Indicates MUTE function is active. Under this mode beeper is disabled.
OUTPUT Information
Indicates output values related to AC voltage, output frequency
Vac: Volts AC, Vdc: Volts DC, Hz: frequency units
Backup Time Info Fault Info Mute Operation
Output & Battery
Voltage Level
Load Level
Input & Battery
Voltage Level
Battery Info
Mode Operation Programmable
Info
Output Info
