USER MANUAL - OPTIMA RT10 1K/1.5K/2K/3K (UL)
VER.2010.22-One (ENG)
3
1.
GENERAL SAFETY INSTRUCTIONS
WARNING
: It is required to read and understand this manual. Follow all instructions given in this manual for starting up and operating
this product. Only qualified technician must start-up, operate and maintain this product. Keep manuals as a guide for future consults.
UPS manufacturer or distributor will never be responsible for any accident produced by lack of knowledge or negligent practices at the
moment of install, starting up or maintain this product. UPS manufacturer or distributor is not liable for any damage that might rise from
misusing this unit or defective installation.
ELECTRIC SHOCK RISK
This product operates with dangerous voltages. It must be installed, operated and maintained ONLY by qualified technicians trained for
this kind of products. Service personnel MUST know and understand very well all electric risks related to this product.
If you are not qualified technician do not try to install, operate or repair this product.
CAUTION:
There are dangerous voltages in the UPS power outlets although the equipment is not plugged to power line.
CAUTION:
Inside this equipment, due to internal batteries, there are ALWAYS dangerous voltages, EVEN the UPS is OFF and unplugged.
CAUTION:
There are dangerous voltages in internal DC Capacitors. Wait at least 10 minutes after turning off UPS before opening it to
access inside.
CAUTION:
Power off UPS and unplugged it from AC Line before opening it to access inside this unit.
CAUTION:
Before starting the opening procedure, remove all jewelry and metallic objects such as: Rings, Watches, Bracelets, etc.,
because they could contact conductive parts and components inside the UPS and this might cause discharges and/or short circuits.
Make sure using tools properly isolated to avoid electrical risks.
WARNING:
This product has been designed to be used indoors protected from water, direct sun light, dust and extreme temperature.
WARNING:
Do not put any object on the UPS; do not apply any force over UPS. Do not cover UPS ventilation.
WARNING:
This UPS must be connected to appropriate electrical service according to selected model. Technical specs label in the UPS
shows the UPS power ratings. DO NOT connect this UPS to any of its own power outlets, this could damage the unit permanently.
WARNING:
Do not connect AC motor-based equipment without a careful sizing of the UPS based on inrush current instead of average
current. Inrush current typical of motor-based system could overload this UPS.
WARNING:
In case of emergency, power-off UPS and turn it off by <OFF> button in front panel. Then call technical service.
INFORMATION FOR THE PROTECTION OF ENVIROMENT
–
UPS SERVICING
This UPS and batteries make use of components dangerous for the environment (electronic cards, electronic components). The
components removed must be taken to specialized collection and disposal centers.
NOTICE TO EUROPEAN UNION CUSTOMERS: DISPOSAL OF OLD APPLIANCES
This product has been supplied from an environmentally aware manufacturer that complies with Waste Electrical and
Electronic Equipment (WEEE) Directive 2002/96/CE. The “crossed
-
out wheelie bin” symbol a
t left is placed on this product to
encourage you to recycle wherever possible. Please be environmentally responsible and recycle this product through your
recycling facility at its end of life. Do not dispose of this product as unsorted municipal waste. Follow local municipal waste
electrical and electronic equipment (WEEE).
2.
PRODUCT DESCRIPTION
This is an Uninterruptible Power Supply (UPS) ONLINE DOUBLE CONVERSION with IGBT technology at rectifier and inverter stages with
PWM modulation. It generates a pure SINEWAVE output free of noise and imperfections for powering and protecting your valuable
system. This UPS is the right choice to protect hardware and data in critical workstations and server applications.
This product has been designed to operate under hostile electrical conditions but offering a reliable performance with outstanding
features and characteristics. Optima RT10 is equipped with a powerful anti-surge system based on MOV technology. This model has
filtering circuits for EMI interferences. It is 100% compatible to operate connected to low quality AC sources like power generators. Soft-
start function allows connection to AC input source is done only when AC input values are confirmed inside operational ranges.
Our monitoring software allows configuring and controlling this UPS by any of available communications ports: USB/RS232 or LAN
Ethernet optional card (under SNMP protocol).
OPTIMA RT10 series has 4 different models for supporting all kind of applications from 1KVA to 3KVA:
Models 120V (UL):
1.000VA/1.000W
1.500VA/1.450W
2.000VA/1.930W
3.000VA/2.880W
Models 220V-230V:
1.000VA/1.000W
1.500VA/1.500W
2.000VA/2.000W
3.000VA/3.000W
