USER MANUAL - OPTIMA RT10 1K/1.5K/2K/3K (UL)
VER.2010.22-One (ENG)
9
6.
OPERATOR INTERFACE: KEYBOARD & LCD
FRONT PANEL:
<ON / MUTE>
UPS TURN-ON:
Keep it pushed for 2 seconds. Is button is release before required time UPS will not turn on.
ALARM MUTE
Some no critical alarms can be muted when this key is selected for 5 seconds
SELF TEST
Operator can manually initiate a self-test when UPS is ONLINE, ECO or FREQUENCY
CONVERTER mode if this key is selected for 3 seconds. Self-test performs a full checking of
systems and batteries.
<OFF / ENTER>
UPS TURN-OFF:
Press for 2 seconds to turn UPS off
ENTER:
When UPS is in configuration mode, this key operates as ENTER
<SELECT>
CHECK VALUES
UPS can show in alternative cycle all available values by pushing this button. Push again to skip
to next value. LCD comes to normal state after 10 seconds.
CONFIGURATION MODE
By pressing for 5 seconds, UPS enters in configuration mode.
<ON / MUTE>
+
<SELECT>
BY-PASS MODE:
UPS will go from ONLINE to BYPASS mode when these 2 buttons are selected at same time for
3 seconds.
QUIT CONFIGURATION MENU
Operator can quit configuration mode by pressing for 2 seconds these 2 buttons at same time.
