Glassgate 150 Maintenance
© Integrated Design Ltd
Issue A1 August 2012
Page 10 of 15
Replacing Optical Cards
Each lane has both Transmit (TX) cards and Receive (RX). On the rare occasion that any of
these cards need to be replaced, follow the instructions above for removing the covers then
continue as below.
Upper Optical Cover
1. To allow for removable of the end caps, loosen the card reader plates (2x fixing bolts
using a 3mm Allen key) and slide down.
2. Using a 5mm Allen key, loosen the top fixing screws. These are internal screws, which
are accessed through a small hole under the upper optical panel.
Loosen (x2)
Loosen (x4)