Glassgate 150 Maintenance
© Integrated Design Ltd
Issue A1 August 2012
Page 3 of 15
Removing the Covers and Glass Barrier
Read the notes below regarding selecting the type of metalwork you have on site.
A - Metalwork with fixed Inner Upper Cover
B - Metalwork with removable Inner Upper Cover
2. Remove Outer
covers; unscrew
Lower Optical
Cover (x2)
3. Remove glass
barrier (see next
section)
4. Remove lower
optical cover
(see below)
1. Remove inner
covers; unscrew
outer covers (x2)
1. Pull inner
covers; unscrew
outer covers (x2)
Note: Inner Upper Cover is a
single piece with no fixings
Note: Inner Upper Cover is two
pieces with fixings top and bottom
3. Loosen fixings
and remove
Inner Upper
Covers (x4)
4. Check outer
cover fixings. If
cap-head Allen
screws, remove
5. Pull outer
covers
6. Unscrew and
remove lower
optical cover
(see below)
2. Remove glass
barrier (see next
section)