PCG System Software Intel® Chipset Software Installation Utility User’s Manual
6
The version codes are translated in the following table:
Operating System
Code
Release Description
Windows 95
4.00.950
Original Retail Version
Windows 95
4.00.950a
OSR1 Version
Windows 95
4.00.950b
OSR2 w/o USB Supplement
Windows 95
4.00.950b
OSR2 with USB Supplement
Windows 95
4.00.950c
OSR2.5 with or w/o USB Supplement
Windows 98
4.10.1998
Original Retail Version
Windows 98 Second Edition (SE)
4.10.2222
Original Retail Version
Windows 2000
5.00.2195
Original Retail Version
3.
How to Identify the Intel Chipset
If you are unsure which Intel chipset is located in your computer, you will need to look at the
motherboard for the chipset markings.
Note
: Some system manufacturers may void your warranty if you open the case. Check with
the manufacturer if you have any concerns about this before proceeding.
Caution
: Make sure you disconnect the power before opening the case. Avoid touching any of
the components inside the system.
The Intel® 800 series of chipsets are comprised of multiple components. The key items to
identify are the I/O Controller Hub (ICH), Memory Controller Hub (MCH), Graphics Memory
Controller Hub (GMCH), and Firmware Hub (FWH) components. The table below shows the
combinations that make up the various Intel chipsets that are supported by the Intel® Chipset
Software Installation Utility:
Intel Chipsets with Integrated Graphics
Intel Chipset
I/O Controller Hub
(ICH)
Graphics Memory
Controller Hub
(GMCH)
Firmware Hub (FWH)
Intel® 810 chipset
82801AA or 82801AB
FW82810 or
FW82810DC100
82802AB or 82802AC
Intel® 810E chipset
82801AA or 82801AB
FW82810E or
FW82810DC100
82802AB or 82802AC
