background image

Intel Desktop Board D945GPM Product Guide 

vi   

 

 

Installing and Removing a Processor ..................................................................................28

 

Installing a Processor .................................................................................................28

 

Installing the Processor Fan Heat Sink .......................................................................31

 

Connecting the Processor Fan Heat Sink Cable.........................................................31

 

Removing the Processor ............................................................................................31

 

Installing and Removing Memory ........................................................................................32

 

Installing DIMMs.........................................................................................................34

 

Removing DIMMs .......................................................................................................35

 

Installing and Removing a PCI Express* x16 Card..............................................................36

 

Installing a PCI Express x16 Card ..............................................................................36

 

Removing the PCI Express x16 Card .........................................................................36

 

Connecting the IDE Cable ...................................................................................................37

 

Connecting the Serial ATA (SATA) Cable ...........................................................................38

 

Connecting Internal Headers...............................................................................................39

 

Installing a Front Panel Audio Solution for Intel

®

 High Definition Audio.......................40

 

Connecting IEEE 1394a Headers ...............................................................................41

 

Connecting the Front Panel Header ...........................................................................41

 

Connecting Hi-Speed USB 2.0 Headers .....................................................................41

 

Connecting Fan and Power Cables .....................................................................................42

 

Connecting Fan Cables ..............................................................................................42

 

Connecting Power Cables ..........................................................................................43

 

Other Connectors................................................................................................................44

 

Setting the BIOS Configuration Jumper...............................................................................45

 

Clearing Passwords ............................................................................................................46

 

3

 

Updating the BIOS

 

Updating with the Intel

®

 Express BIOS Update Utility..........................................................53

 

Updating the Iflash BIOS Update Utility ...............................................................................54

 

Obtaining the BIOS Update File..................................................................................54

 

Updating the BIOS......................................................................................................54

 

Recovering the BIOS..................................................................................................55

 

4

 

Configuring Intel

®

 Matrix Storage Technology (RAID)  Requires Serial 

ATA (SATA) Hard Drives

 

Configuring the BIOS for Intel Matrix Storage Technology..........................................57

 

Creating Your RAID Set (for systems with more than one SATA hard drive) ..............57

 

Loading the Intel Matrix Storage Technology RAID Drivers and Software ..................58

 

Setting Up a “RAID Ready” System............................................................................58

 

5

 

Intel

®

 Quick Resume Technology Driver (Intel

®

 QRTD)

 

Overview .............................................................................................................................59

 

Installation and Configuration ..............................................................................................59

 

A

 

Error Messages and Indicators

 

BIOS Beep Codes...............................................................................................................63

 

BIOS Error Messages .........................................................................................................63

 

Summary of Contents for D945GPM









































































Reviews: