Intel
®
Storage System SSR316MJ2 Cable Kit
15
Remove Fan Assembly from the System and SATA
Cables from the Host Bus Adapter Cards
A.
Simultaneously pull up on both sides of the fan assembly and remove the fan assembly from
the storage system. Set the fan assembly on a static-free surface.
B.
Carefully remove the 16 SATA Cable connectors from the three SATA Host Bus Adapter
Cards near the back of the system. Make a note of the number labels on each SATA Cable. The
new SATA Cables will connect to the SATA Host Bus Adapter Cards in the same numeric
order. See Figure 6.
A
A
B
Figure 6. Removing Fan Assembly and SATA Cable Connectors