Intel
®
Storage System SSR316MJ2 Cable Kit
25
Connect SATA Cables to HBA Cards
A.
Carefully connect the 16 new SATA Cable connectors to the three SATA Host Bus
Adapter Cards. Connect the cables to the cards in the original numeric connection order.
See Figure 16. Ensure that the SATA Cables are routed to the outside of the Host Bus
Adapter Cards. Route the SATA Cables along the side of the chassis in the same way that
the original SATA Cables were routed. The cables remain on the chassis side of the Host
Bus Adapter Cards and connect to the cards from the chassis side.
B.
Insert new plastic cable ties through the steel links on the side of the chassis where the
SATA Cables are normally routed. Bundle the SATA Cables in the same way they were
originally bundled and snap the ties tight into place around the cables. Wrap new plastic
cable ties around the SATA Cables in the other spots where the original plastic cable ties
were cut, and snap the ties tight into place around the cables. See Figure 16. A total of
seven new plastic cable ties should be used.
A
A
A
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
B
Figure 16.
Connecting the SATA Cables to the HBA Cards
